Tornado Titan High Tensile Barbed Wire 200m 14.8kg

Barbed wire provides vital protection to a fence by defending it against downward compression by cattle or other heavy animals. Two lines running 50mm and 150mm above the fence provide optimum levels of protection.

Applications;

• Agriculture
• Road and Rail

Finish: 

Heavily galvanised BS EN 10244 Class A

Tensile Strength: 

1.89mm dia - 415-495 N/mm2

Installation Guide

*See Product Images for Reference*

A straining post is required at every major change in direction or any termination and should be supported by a strut or box assembly. Barbed wire should be tied off on the straining posts by hand or with suitable joiners. Avoid driving staples tight against the wire as this will damage the galvanised coating.

When installing barbed or plain wire above stock netting we would recommend using two strands a maximum of 125mm apart

When installing a multi-line barbed or plain wire fence it is common to run a line of wire along the ground to enable the posts to be positioned in a straight line. This line can then be lifted off the ground and used as the bottom strand

When installing a fence it is common to run a line of plain or barbed wire along the ground to enable the posts to be positioned in a straight line. This line can be left in after the fence has been installed as it will help fill in gaps between the netting and undulations in the ground level, it will also help prevent animals pushing under the net.