Preparation
Always ensure the surface to be treated is clean, dry and free from any dust, algae, fungi or moss.
- To clean wood give it a good brush with a stiff brush to remove any dirt, debris or loose wood
- If the wood has been previously stained, painted or varnished, we recommend you strip it back to the bare wood. For previously stained wood use a suitable wood stripper or sandpaper
Application
Before applying stir the product thoroughly and test a small area to ensure colour and adhesion. Colours can vary dependent on surface to be treated.
- Apply 2 coats with a brush
- Allow the previous coat to soak in before applying the next coat, reapply before fully dry, usually 2-6 hours under normal weather conditions
- Leave 16 hours for the second coat to dry before painting, staining or vanishing
- Apply only in dry conditions, above 5°C and when bad weather is not forecast
Store any remaining product in dry conditions and protect from frost and sunlight
Type | Preserves |
---|---|
Weight (KG) | 0 |
Shipping Type | Local |
Length (mm) | 0 |
Width (mm) | 0 |
Depth (mm) | 0 |
Write Your Own Review