Robeslee Type K9 Prestressed Lintel 100 x 215 x 2100

BEARING: Minimum of 150mm each side or as directed by the structural engineer.

PROPPING: Propping is not required with this type of lintel.

BRICKWORK: Non-composite lintels do not require brickwork bonded to them. Point loads from girders, trusses, steel beams ect. require to be referred to our Customer Advisory Service.

POSITIONING: Lintels must be placed with wire in correct position. Lintels are marked top.

ORDERING: All sizes listed are normal stock sizes.

All lintels are designed in accordance with –

BS 5977: Part 1: 1981, BS EN 845-2: 2103, BS 8110: Part 1: 1985, BS 8110: Part 2: 1985.