Robeslee Type U2 Prestressed Lintel 100 x 145 x 1200mm
SKU: LIN U21200
In stock
BEARING: Minimum of 150mm each side or as directed by the structural engineer.
PROPPING: Propping is not required with this type of lintel.
BRICKWORK: Non-composite lintels do not require brickwork bonded to them. Point loads from girders, trusses, steel beams ect. require to be referred to our Customer Advisory Service.
POSITIONING: Lintels must be placed with wire in correct position. Lintels are marked top.
ORDERING: All sizes listed are normal stock sizes.
All lintels are designed in accordance with –
BS 5977: Part 1: 1981, BS EN 845-2: 2103, BS 8110: Part 1: 1985, BS 8110: Part 2: 1985.
| Type | Type U2 |
|---|---|
| Weight (KG) | 0 |
| Brand | Robeslee |
| Shipping Type | Local |
| Length (mm) | 1200 |
| Width (mm) | 145 |
| Depth (mm) | 100 |
Write Your Own Review