In stock
90° Bend
Available in 1¼", 1½"
Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:200 and BS EN 1329-1:2000, copper pipe and lead pipe
The moulded Internal Sleeve of the Connection, centres and supports the pipe.The Multifit and Friction Washers ensure a secure seal is made between the pipe and the wall of the Fitting. When the compression nut is turned hand tight the best possible mechanical joint is complete.
If a plastic pipe is undersize, or out of shape, the end may require to be warmed to enable it to be pushed over the internal sleeve.
Weight (KG) | 0.086 |
---|---|
Length (mm) | 95 |
Width (mm) | 64 |
Depth (mm) | 95 |
Diameter | 38.1 |
Material | Polypropylene |
Angle | 90° |
Certification | EN 1329-1, EN 1451-1 |
Volume | 1 |
Write Your Own Review