Tornado High Tensile Plain Wire 2.5mm x 650m 25kg Galvanised
SKU: G016209
In stock
Tornado Coiled Plain Wire is used for supporting strained wire netting, controlling stock (in conjuction with droppers or as complete stock fencing) or simply to extend the height of a fence. Tornado coiled wire is a cost effective product to suit a variety of applications such as electric fence, fence topping and vine plant support.
- Heavily galvanised BS EN 10244 Class A
- Line wire diameter- 2.5mm
- Tensile strength- 1235-1390 N/mm2
- Coil weight- 25kg
- Coil length- 650m
Installation Guide
*See Images For Reference*
A straining post is required at every major change in direction or any termination and should be supported by a strut or box assembly. Barbed wire should be tied off on the straining posts by hand or with suitable joiners. Avoid driving staples tight against the wire as this will damage the galvanised coating.
When installing barbed or plain wire above stock netting we would recommend using two strands a maximum of 125mm apart
When installing a multi-line barbed or plain wire fence it is common to run a line of wire along the ground to enable the posts to be positioned in a straight line. This line can then be lifted off the ground and used as the bottom strand
When installing a fence it is common to run a line of plain or barbed wire along the ground to enable the posts to be positioned in a straight line. This line can be left in after the fence has been installed as it will help fill in gaps between the netting and undulations in the ground level, it will also help prevent animals pushing under the net.
| Weight (KG) | 0 |
|---|---|
| Brand | Tornado |
